Fujitsu AGYG14LVCB Operating Manual page 16

CLEANING AND CARE
Air Cleaning Filter Installation
1. Open the Intake Grille and remove the Air
fi lter.
2. Install the Air cleaning fi lter set (set of 2).
Set the air cleaning fi lter into the panel.
Catch it on 5 places of picks.
(3 places of upper parts and lower part 2 places.)
3. Install the Air fi lter and close the Intake
Grille.
● When air cleaning fi lters are used, the effect will increased
by setting the fan speed to "High".
Replacing dirty Air cleaning fi lters
Replace fi lters with the following components (purchased sep-
arately).
● POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR-FC03-2
● Negative air ions deodorizing fi lter: UTR-FC03-3
1. Open the Intake Grille and remove the Air
fi lter.
En-16
Air cleaning fi lter
2. Replace them by 2 new Air cleaning
fi lters.
1 Remove the old air cleaning fi lters in reverse order of
their installation.
2 Install in the same way as for installation of the air
cleaning fi lter set.
3. Install the Air fi lter and close the Intake
Grille.
In regard to the Air Cleaning Filters
POLYPHENOL CATECHIN AIR CLEANING FILTER (1 sheet)
● The Air Cleaning Filters are disposable fi lters. (They can not
be washed and reused.)
● For storage of the Air Cleaning Filters, use the filters as
soon as possible after the package has been opened.
(The air cleaning effect decreases when the fi lters are left in
the opened package)
● Generally, the filters should be exchanged about every
3 months.
Please buy delicated air cleaning fi lters (UTR-FC03-2) (Sold
separately) to exchange the used dirty air cleaning fi lters.
[Negative air ions deodorizing fi lter (1 sheet) — light blue]
● The fi lters should be exchanged about every 3 years so as
to maintain the deodorizing effect.
Please buy delicated deodorizing fi lter (UTR-FC03-3) (Sold
separately) when exchanging the fi lters.
Maintenance of Deodorizing Filters
In order to maintain the deodorizing effect, please clean the
fi lter in the follow way once 3 months.
1 Remove the deodorizing fi lter.
2 Clean with water and dry in the air.
1) Flush the fi lters with high-pressure hot water until the
surface of the fi lters are covered with water. Please
fl ush with diluent neutral detergent.
Never wash by reaming or rubbing, otherwise it
will damage the deodorizing effect.
2) Rinse with water fl ow.
3) Dry in shade.
3 Reinstall the deodorizing fi lter.
Filter Indicator Reset (The special setting)
Can be used if set correctly during installation.
Please consult authorized serviceman when using
this function.
● It lights on when it is time to clean the air fi lters.
Clean the fi lter referring to "CLEANING AND CARE".
After cleaning, press the MANUAL AUTO button (Fig.2 3 )
for 2 seconds or less on the indoor unit.
Indicator Lamp
TIMER OPERATION ECONOMY
: Flashing : OFF