System Settings; Using System Settings; Backlight; Calibration - Modecom FreeWay RS User Manual

modecom gps navigator

3. System Settings

Your device is supplied with default settings. You may also cus-
tomize the settings to suit your personal needs. Once you change
settings, your new settings will remain until either you change
them again, or until battery cut off switch is turned off and then
back on again, which resets the unit to factory defaults.

3.1 Using System Settings

Tap the SETTINGS button on the Main screen.

3.2 Backlight

Tap SETTINGS on the Main screen to enter the backlight setting
as shown below.
Setting the backlight level
Tap the  button to increase the backlight level, and tap the  to
decrease the backlight level.

3.3 Calibration

You can calibrate the touch screen if it is not responding accu-
rately. If screen loses alignment, please calibrate the screen to get
back to normal display.
www.modecom.eu
12