5. Point the remote at
the device and
press the POWER
button. Your device
should turn off.
6. Turn your device on
and press
CHANNEL+. If the
device responds,
setup is complete.
Notes:
For CD players use the AUX buttons.
If your TV/VCR/Cable Box/Satellite
Receiver/DVD Player does not
respond, try the other codes for your
brand. If it still doesn't respond, try the
Code Search method on page 14.
If the LED blinked rapidly when you
entered the code, you may have entered
an invalid code. Recheck the code in the
code list and try again.
If some buttons do not operate your
equipment, try one of the other codes for
your brand.
12
U
AUX
SING
TO CONTROL A
S
TV, VCR, C
ECOND
ABLE
S
R
,
ATELLITE
ECEIVER
OR
The AUX button is normally used to
control an audio component, but it can
also be configured to control a second
TV, VCR, cable box or satellite receiver.
1. Turn on the
equipment you
wish to control.
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
Setup button.
3. Press the AUX
button.
4. Press and release
the mode button
that matches the
A/V equipment
you want to
control. The LED
blinks once.
5. Enter the 3 digit
Code from the
Library Code
Tables. The LED
turns off after the
last digit entered.
6. Point the remote at
your A/V
component and
press the POWER
button. Your A/V
component should
turn off.
7. Turn your A/V
component on and
press CHANNEL +.
If it responds, setup
is complete.
13
B
,
OX
DVD
Need help?
Do you have a question about the SUPERREMOTE UR47A and is the answer not in the manual?