Control Guide; Main Unit/Display - Panasonic SA-HR50 Operating Instructions Manual

Control guide

Main unit
MENU TUNE
SETUP
RETURN
SETUP MIC
Standby indicator [^]
1
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
Standby/on switch [8]
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
[-MENU, ―SETUP, RETURN]
2
• For entering menus to make various settings.
• For returning to previous menus.
[TUNE, 3, 4]
3
For tuning the radio and selecting menu or setup items.
4
[ENTER]
Used during menu or setup operations.
Display
TUNED ST MONO
[TUNED, ST, MONO]
1
Radio indicators
TUNED: A station is tuned
ST: A stereo FM broadcast is tuned
MONO: You have switched to monaural mode to improve
reception
[RDS, PS, PTY]
2
Shows the current RDS display mode.
[SLEEP]
3
Sleep timer indicator.
General display
4
Shows the input mode, radio frequency and other general
information.
[PCM, C.FOCUS]
5
PCM: Lights when the PCMFIX mode is set
C.FOCUS: Appears when you are using Center Focus
4
[DIGITAL INPUT]
6
4 4
Lights when input is digital.
SA-HR50 (RQTV0259-E).indb 4
ENTER
RDS PS PTY SLEEP
AUTO
SPEAKER SETUP
INPUT SELECTOR
AUTO SPEAKER SETUP
5
Flashes during Auto Speaker Setup. Lights when the setup
finishes.
[INPUT SELECTOR, <, >]
6
For selecting input.
[VOLUME]
7
Volume control.
[ ] Headphone jack
8
Plug type: 3.5 mm stereo
• Sound does not come from the speakers if you connect
headphones.
• Avoid listening for prolonged periods of time to prevent
hearing damage.
9
SETUP MIC jack
For calibration microphone.
Remote control signal sensor
10
PCM C.FOCUS
DIGITAL INPUT
M
DIGITAL DTS
SFC
kHz
PL 2CH MIX
MHz
[% DIGITAL, DTS, % PLΙΙ]
7
Lights to indicate the source's input signal and decoding
format used.
% DIGITAL: Dolby Digital sources
DTS: DTS sources
% PLΙΙ: Dolby Pro Logic ΙΙ decoder is being used
[SFC, 2CH MIX]
8
SFC: Appears when you are using an SFC mode
2CH MIX: Appears when you are listening to a multi-channel
source with headphones
[M]
9
Flashes or lights during presetting.
10 [kHz, MHz]
Frequency unit indicators
kHz: AM, or PCM sampling frequency
MHz: FM
1
2
3
4
5
6
7
VOLUME
8
9
10
1
2
3
4
5
6
7
8
9
10
8/24/2007 10:09:59 AM