Step 2 Home Theater Connections; Hdmi And Viera Link "Hdavi Control; High-Quality Audio And Video Simply With Hdmi Connection; Using The Viera Link "Hdavi Control - Panasonic SA-HR50 Operating Instructions Manual

Home theater connections

HDMI and VIERA Link "HDAVI Control

High-quality audio and video simply with HDMI connection

• The HDMI (High Definition Multimedia Interface) connection means you only need one cable to transmit digital audio and video
between two pieces of equipment.
Use only HDMI cables that have the HDMI logo (as shown on the cover).
[Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m) etc.]
HDMI Cable (Use a Panasonic HDMI cable for best results.)
Rear panel
LOOP
ANT
GND
TV HDMI
(AV IN)
75 Ω
LOOP
EXT
Audio and video signal flow when you have used HDMI connections
The audio and video signals from DVD equipment pass through to the television even if this unit is set to standby.
When this unit is on
Video
Audio
SETUP MENU TUNE ENTER
RETURN
SETUP MIC
Video
For your reference
• Audio signals from HDMI connection takes priority to digital terminal connections (
• This unit's HDMI can carry video signals up to 1125p (1080p) (even when this unit is in standby mode).
1125p: a progressive (non-interlace) scanning system that sends 1,125 scan lines every 1/60 second.

Using the VIERA Link "HDAVI Control"

VIERA Link "HDAVI Control"
This convenient feature links control of your receiver and your other Panasonic home theater equipment. VIERA televisions and
DIGA DVD recorders connected with an HDMI cable can be controlled in this way. For details, refer to the operating instructions of
your other equipment.
• VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other
manufacturers' equipment that supports HDMI CEC cannot be guaranteed.
Preparation
1. Connect your other Panasonic home theater equipment (VIERA Link "HDAVI Control" compatible VIERA television or
DIGA DVD recorder) with an HDMI cable (above).
2. Read your television's operating instructions and make the settings necessary to activate the VIERA Link "HDAVI Control".
3. Switch on all your equipment, then switch your television off then on again and check that images from DIGA appear
correctly. (Do this whenever you change connections or settings.)
TV HDMI
(AV IN)
TV (VIERA)
DIGITAL AUDIO
OUT (OPTICAL)
• To take advantage of the multi-channel sounds now available with digital television, use a digital connection if your TV has a
digital output terminal.
• To turn off VIERA Link "HDAVI Control", "HDMI settings",
SA-HR50 (RQTV0259-E).indb 7
"
TM
(DVD-P) IN (BD/DVR) IN
OUT 出力 ( D V D レ コ ーダー)
FM
AUDIO
ANT
BD/DVR
SUBWOOFER DVD-P TV
OUT IN IN IN
DIGITAL IN
L L L
AM
OPT 1 OPT 2 COAXIAL
ANT
R R R
TV BD/DVR DVD-P
When this unit is in
TV
standby mode
(in standby ON condition,
page 13)
➡
Audio
Speakers
INPUT SELECTOR VOLUME
This unit
Audio
DVD equipment
LOOP
ANT (DVD-P) IN
OUT 出力 ( D V D レ コ ーダー)
GND
FM
AUDIO
ANT
BD/DVR
SUBWOOFER DVD-P TV
75 Ω
OUT IN IN IN
L L L
AM
ANT
R R R
LOOP
EXT
➡
• Turn off all components before making any connections.
• Peripheral equipment and cables sold separately
unless otherwise indicated.
• To connect equipment, refer to the appropriate
operating instructions.
BD player/
DVD recorder
DVD HDMI
(AV OUT)
DVD player
DVD HDMI
(AV OUT)
Video
MENU SETUP TUNE ENTER
RETURN
SETUP MIC
Video
page 8).
➡
Rear panel
(BD/DVR) IN
DIGITAL IN
OPT 1 OPT 2 COAXIAL
TV BD/DVR DVD-P
page 13.
Note
Connect only DVD equipment
to the HDMI input terminal
of the unit. Connecting other
equipment may prevent the
output of sounds or show
distorted pictures.
TV
Audio
Speakers
INPUT SELECTOR VOLUME
This unit
Audio
DVD equipment
DVD recorder
(DIGA)
DVD HDMI
(AV OUT)
8/24/2007 10:10:08 AM
7
7 7