Shock And Vibration - National Instruments PXI-8184 User Manual

Shock and Vibration

Note For EMC compliance, operate this device with shielded cabling. In addition, all
covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC)
for this product for any additional regulatory compliance information. To obtain the DoC
for this product, visit
and click the appropriate link in the Certification column.
Safety
For UL and other safety certifications, refer to the product label or visit
Note
ni.com/certification
appropriate link in the Certification column.
© National Instruments Corporation
Operational shock .................................. 30 g peak, half-sine, 11 ms pulse
Random vibration
Operating ........................................ 5 to 500 Hz, 0.3 g
Nonoperating .................................. 5 to 500 Hz, 2.4 g
(Tested in accordance with IEC-60068-2-64. Nonoperating test
profile exceeds the requirements of MIL-PRF-28800F, Class B.)
ni.com/certification
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1
• CAN/CSA C22.2 No. 61010-1
, search by model number or product line, and click the
(Tested in accordance with
IEC-60068-2-27. Test profile
developed in accordance with
MIL-PRF-28800F.)
(with solid-state hard drive)
, search by model number or product line,
A-3
Appendix A Specifications
rms
rms
NI PXI-8184/8185 User Manual