Chapter 4
Common Configuration Questions
Operating System and Software Driver Installation
Chassis Configuration
NI PXI-8184/8185 User Manual
How do I install or reinstall the video driver?
Refer to the
Drivers.txt
How do I install or reinstall the Ethernet driver?
Refer to the
Drivers.txt
How do I install software from a CD?
The compact size of the NI PXI-8184/8185 does not allow for an integrated
CD-ROM drive. If you are using Windows XP, you have the following
options:
•
USB CD-ROM—Windows XP supports installing from a USB
CD-ROM using a bootable installation CD.
•
SCSI, LPT, or PC Card-based CD-ROM—Other types of CD-ROM
drives are available. Check with the vendor to make sure Windows XP
supports the drive.
•
Mapped network drive—You can use the Ethernet to connect to
another computer. If you share the CD-ROM drive on the other
computer, you can map the shared CD-ROM drive to a drive letter
on the NI PXI-8184/8185.
How do I set up the NI PXI-8184/8185 to work with my chassis?
Configuration of the PXI system is handled through Measurement &
Automation Explorer (MAX), included with the software pre-installed on
your controller. MAX creates the
layout and parameters of your PXI system.
file on the hard drive or recovery CD-ROM.
file on the hard drive or recovery CD-ROM.
pxisys.ini
4-4
file, which defines the
ni.com