Table of Contents
Advertisement
Chapter 4
BIOS
Note
During the initial boot process, both the LCD and CRT displays are enabled.
Updating the BIOS
PXI-8170 Series User Manual
•
Both—Both the CRT and LCD Displays are always enabled.
•
Auto—If a CRT is connected to the controller at boot, only the CRT is
enabled. If a CRT is not connected at boot, only the LCD is enabled.
You must set the correct resolution for the LCD Display. See Appendix A,
Configuring the PXI-8170
Your PXI-8170 Controller contains Flash ROM that allows the BIOS to be
updated. Contact National Instruments for BIOS updates.
Series, for LCD resolution settings.
4-2
www.ni.com
Advertisement
Table of Contents
