Wired Remote Control - Daikin FCQ35B7V1 Technical Data Manual

9 Control systems
9-1

Wired remote control

9
Name and function of each switch and display on
9-1
the remote control
ON/OFF BUTTON
1
Press the button and the system will start. Press the button again and the system will stop.
OPERATION LAMP (RED)
2
The lamp lights up during operation.
DISPLAY ' h ' (UNDER CENTRALISED CONTROL)
3
When this display shows, the system is UNDER CENTRALISED CONTROL. (This is not a standard
specification).
DISPLAY '
4
It is impossible to changeover heat/cool with the remote controller when this icon is displayed.
DISPLAY '' '', ''
AIR CLEANING)
5
This display shows that the total heat exchange unit and the air cleaning unit are in operation.
These are optional accessories.
DISPLAY ' A ' ' I ' ' , ' ' u ' ' w ' (OPERATION MODE)
6
This display shows the current OPERATION MODE. For cooling only type, ' , ' (Auto) and ' w '
(Heating) are not installed.
DISPLAY ' b ' (INSPECTION/TEST OPERATION)
7
When the INSPECTION/TEST OPERATION BUTTON is pressed, the display shows the mode in which
the system actually is.
DISPLAY 'I' (PROGRAMMED TIME)
8
This display shows PROGRAMMED TIME of the system start or stop.
DISPLAY ' O ' (SET TEMPERATURE)
9
This display shows the set temperature.
DISPLAY ' B C '(FAN SPEED)
10
The display shows the set fan speed.
11
DISPLAY ' a ' (AIR FLOW FLAP)
12
DISPLAY '' '' (TIME TO CLEAN AIR FILTER)
16
• 4-Way Blow Ceiling Mounted Cassette • R-410A • FCQ35-60B7V1B
' (CHANGEOVER UNDER CONTROL)
'', '' '', '' '', '' '' (VENTILATION /
• Split - Sky Air • Indoor Units
13
DISPLAY '' '' (DEFROST)
14
TIMER MODE START/STOP BUTTON
15
TIMER ON/OFF BUTTON
INSPECTION/TEST OPERATION BUTTON
16
This button is used only by qualified service persons for maintenance purposes.
PROGRAMMING TIME BUTTON
17
Use this button for programming 'START and/or STOP' time.
TEMPERATURE SETTING BUTTON
18
Use this button for SETTING TEMPERATURE.
19
FILTER SIGN RESET BUTTON
FAN SPEED CONTROL BUTTON
20
Press this button to select the fan speed, HIGH or LOW, of your choice.
OPERATION MODE SELECTOR BUTTON
21
Press this button to select OPERATION MODE.
22
AIR FLOW DIRECTION ADJUST BUTTON
OPERATION MODE/FAN SPEED (only for HRV units) Refer to the manual
23
of VAM units for more details.
(NOTE)
+ For the sake of explanation, all indications are shown on the display in
the figure contrary to actual running situations.