Table of Contents
Advertisement
6. Microphone
Positioning
For the Pro-Fit Mobile Headset,
the microphone boom should be
adjusted so that the microphone
is approximately one-half inch (12
mm) below and away from your
lower lip (see Figure 6-1).
Figure 6-1. Positioning the Microphone.
The Pro-Fit Mobile Headset is
equipped with a noise-canceling
microphone. This directional
microphone rejects background
noise and is better suited for noisy
environments. Position the
microphone properly to take
advantage of the noise-canceling
qualities of this microphone.
Your Pro-Fit Mobile Headset has a
flexible microphone boom:
The flexible boom can be
reshaped until the microphone is
correctly positioned in front of
your mouth. One hand should
grasp and steady the receiver end
of the boom. The other hand can
then flex the boom (see
Figure 6-2).
CHAPTER 6: Microphone Positioning
Figure 6-2. Flex Boom Positioning.
CAUTION
Never forcefully rotate the
microphone boom past its stop
point in the receiver assembly!
17
Advertisement
Table of Contents
