Table of Contents
Advertisement
Some laptops do not expect bridges behind an ExpressCard module, and they will
Note
not configure the PXI/cPCI system correctly. Refer to the Related Links section of
KnowledgeBase 3U7CI4D8 for a link to a list of compatible laptops.
Unpacking
Caution
Never touch the exposed pins of connectors. Doing so may damage the device.
© National Instruments Corporation
Your NI ExpressCard MXI boards are shipped in antistatic packages to
prevent electrostatic damage (ESD) to the devices. ESD can damage
several components on the device.
To avoid such damage in handling the device, take the following
precautions:
•
Ground yourself using a grounding strap or by holding a grounded
object.
•
Touch the antistatic package to a metal part of the computer chassis
before removing the device from the package.
Remove the device from the package and inspect the device for loose
components or any sign of damage. Notify NI if the device appears
damaged in any way. Do not install a damaged device into the computer,
PXI/cPCI, or PXIe/cPCIe chassis.
Store the device in the antistatic envelope when not in use.
1-3
NI ExpressCard MXI Series User Manual
Chapter 1
Introduction
Advertisement
Table of Contents
