Honda 32KZLK000 Manual page 79

12 NSC110MPD-32KZLK000.book 76 ページ ２０１１年１２月１４日 水曜日 午後４時５分
Electrical Trouble Burned-out Light Bulb
u
Pin
6. Remove the dust cover.
7. Press the pin down and pull out the bulb
without turning.
8. Install a new bulb and parts in the reverse
order of removal.
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
alcohol.
76
Bulb Dust cover
❙
Position Light Bulb
Screw Connector
Bolt
Clip
Screws
Front turn signal light assembly
1. Remove the front centre cover.
2. Remove the front turn signal light
assembly by removing the screws, bolt
and clip ( P. 52), then disconnect the
2
connector.
Screws
P. 51
2