Table of Contents
Advertisement
en
Fault
Possible cause
The temperature in the
The fixed setting has been
cool fresh"
selected too high or too
compartment is too cold
low.
or too warm.
Customer service
Please check your telephone book or the
customer service list for your nearest
customer service facility. When
contacting customer service, please
ALWAYS quote the product number
(E number) and production number
(FD number) of your appliance.
26
Remedial action
The temperature in the cool fresh"
compartment can be corrected (for example,
if there is frost in the cool fresh"
compartment).
To do this, switch off the main switch,
Fig. 2/1. Simultaneously press buttons,
Fig. 2/2 and Fig. 2/1, until 88" is
displayed, Fig. 2/4, and goes out again
(release the buttons).
Then the set temperature flashes (e.g. 2 °C).
Attention: If the display, Fig. 2/4, does not
flash, the buttons were inadvertently held
down too long. Switch off the appliance
again and repeat the process as described
above.
To set the temperature, keep pressing the
button, Fig. 2/2, until the required
temperature is displayed. Setting range from
0 °C 4 °C.
The set temperature is saved after 1 minute
and the display switches back to the current
temperature in the refrigerator
compartment.
These numbers can be found on the
rating plate. Fig. z
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
Advertisement
Table of Contents
