Sub-Zero 315W Design Manual page 3

W I N E S T O R A G E
U N D E R C O U N T E R
1 7
15 / " 23 / "
8
8
(384) (606)
1
34 / " 34"
16
(865) (864)
M O D E L 3 1 5 W M O D E L 4 2 4
Built-In Built-In
A L L W I N E S T O R A G E
30"
(762)
27"
(686)
80" 84"
(2032) (2134)
M O D E L 4 2 7 M O D E L 4 3 0
Integrated Built-In
|
W I N E S T O R A G E R E F R I G E R A T O R
27"
(686)
80"
(2032)
M O D E L 4 2 7 R
Integrated
Dimensions in
parentheses are in
millimeters unless
otherwise specified.
50
1
24 / "
4
(616)
3
34 / "
16
(868)
M O D E L 4 2 4 F S
Free-Standing
With the installation of a harness kit,
Wine Storage models, except Model 315W,
are Star-K compliant to meet strict religious
regulations in conjunction with specific
instructions found on www.star-k.org.
For details about the harness kit, contact
your Sub-Zero dealer.
The illustrations represent the full line of
Wine Storage models. The Model 424FS
free-standing unit comes with a classic
stainless steel exterior.
Comprehensive installation instructions are
shipped with each model. Refer to those
instructions in preparing and installing all
Sub-Zero products. The instructions can also
be found on our website, subzero.com.
W I N E S T O R A G E
Sub-Zero's innovative addition to its complete
line of residential refrigeration is wine storage
equipment—the ultimate in beauty, engineering,
and attention to detail. From the exterior and the
smooth lines of the free-standing Model 424FS
classic stainless steel to the ability to use wood
on the Built-In and Integrated models, each unit
is beautiful.
With the exception of the free-standing Model
424FS, each model is available in three stainless
steel finishes and will have the capability of
having wood panels applied to the doors. With
the Model 427R, you can also apply the wood to
the drawers.
The new Model 315W, a single-zone Wine
Storage unit, comes only with a glass door and
can be ordered as an overlay or classic stainless
steel unit.
The free-standing Model 424FS does not require
any panels or surrounding cabinetry; it comes
with classic stainless steel exterior.
All models will be shipped with glass doors as
standard equipment. The glass doors allow one
to see the wine that is being stored. Optional
solid doors and high altitude glass doors will be
treated as special orders and must be ordered 90
days before you expect delivery. Model 315W
cannot be ordered with a solid door.
Stainless steel models will be shipped with
tubular stainless steel handles, while the overlay
models will come with no handle hardware.
Optional stainless steel panels and handles for
Models 427 and 427R are offered in the classic,
platinum and carbon stainless steel finishes and
are ordered and shipped as sales accessories.
The stainless steel Models 424 and 430 must be
ordered in one of three stainless steel finishes of
classic, platinum and carbon.
Optional handles are available for all models
except the framed and stainless steel Model
430. The framed Model 430 will come with an
extruded handle identical in design to our Built-In
models.
Standard grille assemblies for the Model 430 will
be provided in 1" (25) increments from 10" (254)
to 15" (381). The standard height will be 11"
(279). The framed model will have a louvered
grille, the stainless steel model will feature a
heavy-duty grille, and the overlay model will
have the panel grille, which accepts decorative
panel inserts.
For information regarding specific Wine Storage
models, refer to the illustrations in this section.