Network - Magnavox 55MV314X Owner's Manual

Network

Set up Network connection settings in order to use Internet
TV or Network Upgrade function.
1
Display Setup using Home Menu and use H I to select
Installation, then press OK.
2
Use H I to select Network, then press OK.
Network Settings Assistant
Before you proceed to Connection test or other settings in
Network section, run the Network settings assistant to
connect the TV to your Network.
Wireless setting
Select to use a wireless LAN to connect to the internet by
wireless connection.
3
Use H I to select Network settings assistant then
press OK.
4
Press OK to select Start now.
5
Use H I to select Wireless, then press OK.
6
Use H I to select the desired setting, then press OK,
and follow the On-screen Instructions.
Setting items
Select this setting if your router has a Wi-Fi
Protected Setup (WPS) button. Start
scanning for Wireless Networks on the TV
Simple Connect
after pressing the WPS button on your
router. If connection test fails, refer to the
router's manual for more details.
Search for Wireless Networks automatically
Scan
and select the Wireless Network name
(SSID) from the list.
Set up the connection to the Wireless LAN
Access Point (AP) (e.g. wireless router)
Manual entry
manually by entering the Wireless Network
name (SSID).
Wired setting
Select to use an Ethernet cable to connect to the internet by
wired connection. Please purchase shielded Ethernet cables
at your local store and use it when you connect to Network
equipment.
3
Use H I to select Network settings assistant then
press OK.
4
Press OK to select Start now.
5
Use H I to select Wired, then press OK.
Connection test will start automatically. (Refer to Connection
●
Test L p. 9.)
Description
Connection Test
Perform the following steps to test your internet connection
after you have connected an Ethernet cable or entered
Network settings such as IP address, DNS settings, etc.
manually.
3
Use H I to select Connection test, then press OK.
4
Press OK to select Start now.
Connection test will start automatically and the test result for
●
Home Network and Internet will appear right after the
connection test finishes.
"Testing..." is displayed while the connection test is in
●
progress.
Home
Internet
Network
Pass Pass
Fail
-
Pass Fail
If the connection test for Internet passes, speed test will start
●
automatically.
5
Press OK to go to the Network status confirmation list
screen.
6
Press OK to exit.
Note(s)
O
If the connection test for both Home Network and Internet pass,
●
you are ready to use Internet TV or Network Upgrade function
using the internet without making any additional settings.
If the connection test fails, check if the Ethernet cable is
●
connected to this TV properly or if you have entered all the
required details for the wireless LAN connection properly.
9
Description
Connection test is successfully
completed.
Connection test for Home Network
failed. Check the connection settings.
Connection test for Internet failed.
Check the connection settings.
Continued on next page.