Caption Settings - Magnavox 55MV314X Owner's Manual

For PC Input signal
4:3
This unit can also be connected to your PC that has a DVI Terminal.
●
Use an HDMI-DVI Conversion Cable for this Video Connection
and it requires Stereo Mini 3.5mm Plug Audio Cable for Analog
Audio signal as well.
Refer to 16:9 Video Signal on this page if the PC has HDMI Output.
●
Displays a proportionately stretched picture.
4:3
Sidebars appear on both edges of the screen.
Displays a picture that is stretched out of proportion
Wide screen
to fill the screen.
Unscaled
Displays a picture in its original size.

Caption Settings

Closed Captions displays the Audio portion of the Program
as Superimposed Text over the Video.
1
Display Setup using Home Menu and use H I to Select
Features, then press OK.
2
Use H I to Select Caption settings, then press OK.
Closed captions
You can choose the closed caption display.
3
Use H I to Select Closed captions, then press OK.
4
Use H I to Select On, Off or CC w/ mute, then press
OK.
Digital TV Operation
Digital caption service
3
Use H I to select Digital caption service, then press
OK.
4
Use H I to select the desired Digital caption service,
then press OK.
Select one of these before changing any other item in
CS-1 to
Caption settings menu. Choose CS-1 under normal
CS-6
conditions.
Cable / NTSC (Analog) TV Operation
Caption service
3
Use H I to Select Caption service, then press OK.
4
Use H I to Select the desired Caption service, then
press OK.
The primary Closed Captions and Text Services. The
CC-1 and
Closed Captions or Text is Displayed in the same
T-1
Language as the Program's Dialog (up to 4 lines of script
on the TV Screen).
CC-3 and
Serve as the preferred Data Channels. The Closed
T-3
Captions or Text is often a Secondary Language.
Rarely available and Broadcasters use them only in
Special conditions, such as when CC-1 and CC-3 or T-1
and T-3 are Not available.
There are 3 Display modes according to Programs:
●
CC-2,
Paint-on
CC-4, T-2
and T-4
Pop-on
Roll-up
Wide screen Unscaled
Displays Characters on the TV screen
immediately.
Once Characters are Stored in Memory,
they are Displayed All at Once.
Displays the Characters Continuously by
Scrolling (max. 4 lines).
Digital caption options
You can choose the size, font, color, background and other
characteristics for the captioned text.
3
Use H I to Select Digital caption options, then press
OK.
4
Use H I to Select an item and press OK, then use H
I to Select the desired setting and press OK.
Note(s)
O
Closed Captions Service may not be controlled by this Unit's Menu
●
options if you are watching television through an External Cable or
Satellite Set-top Box. In which case you will need to use the Menu
options on the External Set-top Box to control Closed Captions.
The Captions do not always use correct Spelling and Grammar.
●
Not all TV Programs and product Commercials include Closed
Captions information. Refer to your area TV Program Listings for
the TV Channels and times of Closed Captions shows. The
Closed Captions Programs are usually noted in the TV Listings
with a Service Mark such as CC.
Not all Closed Captions Services are used by a TV Broadcaster
●
during the Transmission of a Closed Caption Program.
The EUT setting that satisfies § 79.102 (e) is as follows:
●
Font: Mono-font
–
Character Size: Large
–
12
Continued on next page.