National Instruments 2 SD Card Memory Module NI 9802 Operating Instructions Manual page 2

The National Instruments 9802 is an SD Card storage module that
can read from and write to SD Cards.
Note
active chassis, such as the cRIO-910x.
This document describes how to use the NI 9802 and includes
specifications for the NI 9802. For information about installing,
configuring, and programming the system, refer to the system
documentation. Visit
rdsoftwareversion
the modules you are using.
Note
document are specific to the NI 9802. The other
components in the system might not meet the same safety
ratings and specifications. Refer to the documentation for
each component in the system to determine the safety
ratings and specifications for the entire system.
NI 9802 Operating Instructions and Specifications
The NI 9802 is supported only in CompactRIO
ni.com/info
to determine which software you need for
The safety guidelines and specifications in this
and enter the info code
2 ni.com