Akai MPD26 Quick Start Manual page 7

EDIT MODE
Pressing [EDIT] calls up Edit
Mode. In this mode, you can
edit the settings of the currently
selected Preset. The settings
vary depending on the controller
you are editing
described on the following page.
Please note that the changes
you make will only apply to the
currently selected Preset.
Also note that if you wish to save
the changes made in Edit Mode,
you will need to save the current
preset.
You can use the example screenshot on the right to
help you determine where the Page 2 parameters
described on the following page will appear on the
screen.
EDIT MODE PARAMETERS
CONTROLLER
PADS
KNOBS AND FADERS
BUTTONS
NOTE REPEAT
TIME DIVISION
TRANSPORT
TAP TEMPO
FOR DETAILED INFORMATION ON EDIT PARAMETERS, PLEASE REFER TO THE OPERATOR'S MANUAL
INCLUDED ON THE CD.
1. Press [EDIT] to enter Edit Mode.
2. To select the controller you wish to edit, simply engage it – this will
prompt the screen to display the available event types for the particular
and are
controller (Page 1).
3. If there are multiple event types for the selected controller, turn the
[VALUE] dial to select the desired event type. Press [ENTER] to view
the parameters of the selected event type, if available (Page 2).
4. To move between the parameter fields on Page 2, use [<] and [>]. To
change the values of the fields, turn the [VALUE] dial.
5. When finished editing the controller, press [ENTER] to accept the
change or press [<] to cancel.
PAGE 1 (EVENT TYPE)
NOTE
PROGRAM CHANGE
CONTROL CHANGE
AFTERTOUCH
CONTROL CHANGE
PROGRAM CHANGE
TOGGLE/MOMENTARY
GATE/SWING
DIVISION
TRANSPORT FUNCTION
TEMPO
NAVIGATING EDIT MODE
PAGE 2 (PARAMETERS)
MIDI CHANNEL (field 1)
NOTE NUMBER (field 2)
PLAY MODE (field 3)
PRESSURE BEHAVIOR (field 4)
MIDI CHANNEL (field 1)
PROGRAM CHANGE NUMBER (field 2)
BANK M (MSB) (field 3)
BANK L (LSB) (field 4)
MIDI CHANNEL (field 1)
CC NUMBER (field 2)
RANGE – MINIMUM VALUE (field 3)
RANGE – MAXIMUM VALUE (field 4)
MIDI CHANNEL (field 1)
CC NUMBER (field 2)
RANGE – MINIMUM VALUE (field 3)
RANGE – MAXIMUM VALUE (field 4)
MIDI CHANNEL (field 1)
CC NUMBER (field 2)
BUTTON MODE (field 4)
MIDI CHANNEL (field 1)
PROGRAM CHANGE NUMBER (field 2)
BANK M (MSB) (field 3)
BANK L (LSB) (field 4)
BUTTON MODE (field 2)
NOTE REPEAT GATE VALUE (field 2)
NOTE REPEAT SWING VALUE (field 4)
DEFAULT TIME DIVISION (field 2)
MMC, MIDI, MMC/MIDI, or CTRL (field 2)
BPM (field 2)
6
FIELD 1
FIELD 2
FIELD 3
FIELD 4