Sony Trinitron KV-29FV300 Service Manual page 113

Connecting a TV, Satellite Receiver, and VCR
1
Satellite Receiver
1
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF
jack on your TV.
4
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your VCR
to AUDIO and VIDEO IN on your TV.


To view from the satellite receiver or VCR, select the video input to which your satellite receiver or
VCR is connected by pressing
4
From
cable/
antenna
VCR
5
on the remote control.
Connecting Your TV
Rear of TV
1 3 4
2
3
Video (yellow)
Audio L (white)
Audio R (red)
17