Page 1
OWNER’S MANUAL STARTING SERIAL #: L107-243001 MODEL NO. LV87551 LV87551-CA LAWN VACUUM Wand Adaptor Kit sold separately. Part Number 10756 IMPORTANT Read and follow all Safety Assembly Precautions and Instructions before operating this Operation equipment. Service and Adjustment Rev. 07-270...
1-800-222-8183. The model number, serial number, date of purchase, and the name of the authorized Swisher dealer from whom you purchased the mower will be needed before any warranty claim can be processed.
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands, feet, and throw objects.
Do not fill the lawn vacuum to its full capacity without checking the towing capacities of the tow vehicle. SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. OD55-TRIANGLE DANGER DECAL OD70142-DANGER STOP ENGINE...
Page 5
Decal Locations OD99125 Both Sides OD99156...
Page 6
UNCRATING ANDASSEMBLY INSTRUCTIONS Remove crate top, sides, and end panels and set aside. Remove small components and identify each piece. Be sure the cart release latch is securely fastened. Roll trailer off of pallet. Do not remove the motor base assembly from the crate at this time. The motor base assembly has been located on the crate in a position to aid in the alignment and assembly of the motor base to the lawn vac frame.
UNCRATING INSTRUCTIONS Remove contents from the cart. As noted previously. Remove the plastic ties securing the motor base assembly to the crate but leave the motor base in position on the crate to aid in assembling to the cart. Remove the cart from the crate base and turn it to align with motor base as shown in the illustration. Roll the cart forward, sliding the cart frame into the motor base.
Page 8
Quick Link Quick Link Fig. 4 Fig. 5 Blower Front Tarp Strap Boot Hose...
Page 9
PREPARING THE DECK BOOT • View the boot templates that are provided. Select the template that corresponds with the discharge opening of your mowing deck. If a template does not exist for your mower, then one will need to be created. •...
OPERATING YOUR LAWN VACUUM The operation of any lawn vacuum can produce foreign objects to be thrown into the eyes, resulting in severe eye damage. Always wear certified safety glasses or wide-vision safety goggles over spectacles before starting any cutting machine and while operating such a machine.
Page 11
VACUUM AND EMPTY • Inspect the Lawn Vacuum to make sure all covers, tilt latch lever, elbow, hose adapter, and hose are properly attached. • Check tires for proper inflation. • Check for proper oil and gas levels in both vacuum and lawn tractor engines. •...
Page 12
TWO – IN – ONE APPLICATION Your Swisher Lawn Vacuum has been designed to perform two functions with one product. While you are not using your Lawn Vacuum to collect leaves and grass clippings, the engine assembly, fabric cover, and upper frame may be disassembled to leave you with a utility trailer.
• Regular cleaning and scheduled maintenance will prolong the life and performance of your Swisher Lawn Vacuum. • Remove debris as it accumulates, paying special attention to the hoses. • Replace or repair any damaged or worn parts immediately.
Page 14
See Detail A DETAIL A SEE DETAIL B DETAIL B Ground for Mag. Shroud Bolt 8-16-07...
All Lawn Vacuum parts listed herein may be ordered directly MODEL NO. from Swisher Mower & Machine Co. Inc., your nearest Swisher dealer, or from our website. www.swisherinc.com LV87551 All engine parts may be ordered from the nearest dealer of the...
Need help?
Do you have a question about the LV87551 and is the answer not in the manual?
Questions and answers