Mitsubishi Electric AG-150A Instruction Book page 14

3-3-3 Using a graph
Click [Trend Graph] on the measurement condition list screen, and select the measured item to be displayed.
The measured value can be checked by graph. The graph can also be downloaded as a CSV file.
Update to most recent
condition
Click to update the screen so
that the most recent operation
condition is shown.
Selection of measured
item
Select the measured item to be
displayed.
Measurement value
The measured value is
displayed as a graph.
Download
Click to download the graph
being displayed.
Item
Overview
Update to most recent condition
Selection of measured item
Measurement date
Electric Energy (kWh)
Electric Power (kW)
Outdoor unit
Efficiency
Switches to the screen where the measurement value can be checked as a list.
Click [Update] to ensure the displayed items reflect the most recent operation
condition.
Click the [Selection of measured item], and select the measured item to be
displayed from the list.
Select the date when the value to be displayed is measured.
Note: Up to 62 days of the measurement data collected by the outdoor units can be
stored and displayed.
Electric energy (kWh) is shown as a bar graph in 30-minute increments.
Electric power (kW) is shown as a line graph in 5-minute increments.
Note: The largest value of the values measured at 1-minute intervals in each 5 minutes
will be displayed..
Efficiency is shown as a line graph in 5-minute increments.
Note: The average value of the values measured at 1-minute intervals in each 5 minutes
will be displayed.
Note: The value for Efficiency will read "0" when the compressor on the outdoor unit
remains stopped for 5 minutes.
13
Overview display
Click to display the measurement
value as a list.
Measurement date
Select the date when the value
to be displayed is measured.
Description