Enabling The Function That Measures The Electric Power By The Outdoor Unit - Mitsubishi Electric AG-150A Instruction Book

3-2 Enabling the function that measures the electric power by
the outdoor unit
On the Measurement Settings screen that appears when the above-mentioned address is entered, the
settings for the measurement of the electric power by the outdoor units as well as the settings for the
temperature, humidity, power
(PAC-YG60MCA).
After the settings are made, click [Save Settings] to send setting data to AG-150A.
Note: License of "Web Monitor" or "Basic License Pack" is necessary to use the web browser and update program. Register the
license key on the AG-150A LCD screen.
A one-day license key can be registered on the LCD screen that allows the user to use the "Web Monitor" only on the day of
the registration. Use this license key to update the program or to use the initial setting browser, or in any other situations
when a temporary license key is necessary.
Note: The use of the function of the outdoor units that measures the electric power will require the "Energy Management License
Pack."
Note: All connected outdoor units will appear on the screen. The setting for the electric power measurement function of the
outdoor units that do not have that function will be fixed to [Not Available] and cannot be changed to [Available].
Address
Unit address will be displayed
here.
Selection of separator
character
Select the separator character
for CSV file.
Selection of decimal point
character
Select the decimal point
character.
Refresh
Read setting data from AG-150A.
3-2-1 Entering the outdoor unit names
Click on the scroll bar to scroll down to the outdoor unit
to be selected as the electric power measurement
target, and enter its name.
3-2-2 Switch between [Available] and [Not Available]
If [Available] is selected for the "Outdoor unit
measurement function," outdoor units
measuring the electric power.
measurement for the AI controller (PAC-YG63MCA) and PI controller
will begin
10
Name of outdoor unit
Set the name of outdoor unit.
Outdoor unit measurement
function
Switch between [Available] and
[Not Available] for the electric
power measurement function.
Scroll bar
Switch the address.
Save Settings
Send setting data to AG-150A.