Hitachi DH 40FR Technical Data And Service Manual page 9

7. Digging work (substitute pick-ax) (hammering)
(1) Scoop
Overall length
405 mm (16")
8. Syringe (for chip removal)
Code No. 320859
9. Grease for hammer, hammer drill
500 g (1.1 lbs.) Can
Code No. 980927
Note: Code numbers listed above are subject to change without notice. Please refer to periodic Technical
News Bulletins for updates.
+
Width
105 mm (4-1/8")
Code No. 318085
70 g (2.5 oz) Tube
Code No. 308471
Code No.
985386
30 g (1 oz) Tube
Code No. 981840
--- 6 ---