Cooking Time; End Time - Siemens HB676GB.1 Instruction Manual

Cooking time

If you set the cooking time for your meal, the operation
stops automatically once this time has elapsed. The
oven stops heating.
Prerequisite: A type of heating and a temperature have
been set.
For example: Setting for 4D hot air, 180 °C, cooking
time 45 minutes.
Press the button.
0
1.
The time-setting options menu opens.
Set the cooking time using the rotary selector.
2.
Press the Start/Stop button to start.
3.
You can see the cooking time counting down in
x
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Cancelling the cooking time
Press the button to open the time-setting options
0
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
Changing the cooking time
Press the button to open the time-setting options
0
menu. Change the cooking time using the rotary
selector.

End time

If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu is open.
0
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
button.
Touch the "End " field.
y
1.
The end time is displayed.
Using the rotary selector, set a later end time.
2.
Confirm with the Start/Stop button.
3.
The oven is in standby. The operation starts at the
appropriate time. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Correcting the end time
This is possible if the oven is in standby. Use the
button to open the time-setting options menu, touch
"End y " and use the rotary selector to correct the end
time. Press the button to close the menu.
0
Cancelling the end time
This is possible if the oven is in standby. To do so, open
the time-setting options menu using the
Touch "End " and reset the End time using the rotary
y
selector. The cooking time immediately starts to count
down.
Time-setting options en
button.
button.
0
0
15