Wired Remote Control; Outdoor Unit - Samsung CH090EAV Installation Manual

Wired remote control

 If an error occurs,
If you would like to see an error code, press the Test button.

Outdoor unit

Display
Indoor unit Communication Error
Indoor/Outdoor unit Communication Time Out Error
60 Packet Over data
Indoor unit is not connected
Communication Error between Outdoor Main and Inverter
Micom (Occurred after 1 minute detection in Main and Inverter)
Indoor Temp. Sensor (Open/Short Error)
Indoor Unit Eva in Sensor (Open/Short Error)
Indoor Unit Eva in Sensor Separation
Outdoor Temp. Sensor Error (Open/Short Error)
COND Temp. Sensor Error (Open/Short Error)
Inverter Compressor Discharge Temp. sensor Error
(Open/Short Error)
Power cable miss connection error
Indoor Float S/W 2
Outdoor unit - indoor unit communication wire miss connection
(Connected to Power terminal)
Outdoor unit refrigerant Full leakage (Gas leak)
Outdoor Fan 1 Error
Outdoor Fan 2 Error
Discharge over temperature
[Inverter] Compressor starting error
Primary Current Over Trip error
[Inverter] DC PEAK error(O.C)
[Inverter] Compressor Rotation error
[Inverter] Current Sensor error
[Inverter] DC LINK Sensor error
[Inverter] EEPROM Read/Write Error
[Inverter] Heatsink temperature over Error
Outdoor unit Capacity Setup option error
Communication error between Indoor unit and wired remote control
Communication error between Master and Slave wired remote control
COM1/COM2 Cross-installed error
Error of setting option for wired remote control COM2
CH｣ｪ｣ｪ｣ｪEAV_IM_E_26918.indd 19
is displayed on the wired remote control.
Explanation
nd Detection
Remark
Communication Error
Indoor Sensor Error
Outdoor Sensor Error
Self Diagnosys Error
Outdoor Unit Protection
Control Error
Wired Remote Control Error
19
E-
2007-05-10 ｿﾀﾈﾄ 3:52:04