Related Manuals for Samsung VC-6016V
Summary of Contents for Samsung VC-6016V
-
Page 1: Operating Instructions
DJ68-00186G (0.0) 3/21/03 11:41 AM Page 1 Operating Instructions VC-6000 SERIES VACUUM CLEANER Before operating this unit, please read the instructions carefully. -
Page 2: Important Safeguards
DJ68-00186G (0.0) 3/21/03 11:41 AM Page 2 IMPORTANT SAFEGUARDS This appliance must be connected to the same main voltage as shown on the rating plate. This vacuum cleaner is not suitable for removing any kind of liquid. Carpets treated with a liquid cleaner must be allowed to dry before being cleaned with the unit. -
Page 3: Identifications Of Parts
DJ68-00186G (0.0) 3/21/03 11:41 AM Page 3 IDENTIFICATIONS OF PARTS HANDLE SUCTION HOSE AIR REGULATOR DUST-FULL INDICATOR TUBE* CORD REWIND BUTTON BUTTON FOR SUCTION POWER CONTROL SWITCH* HOSE REMOVAL ON/OFF BUTTON CARRYING HANDLE CLAMPER FOR DUST BAG COMPARTMENT FLOOR NOZZLE* RUG/FLOOR SELECTOR Features marked with * may vary according to model. -
Page 4: On/Off Switch
DJ68-00186G (0.0) 3/21/03 11:41 AM Page 4 POWER CORD 1) PULLING OUT The power cord is long enough to be drawn out for convenience. 2) REWINDING When you have finished cleaning, disconnect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe. - Page 5 DJ68-00186G (0.0) 3/21/03 11:41 AM Page 5 DUST-FULL INDICATOR If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. If the “Dust-Full” indicator continues to display “RED” even after NOTE : changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.
-
Page 6: Replacing The Dustbag
DJ68-00186G (0.0) 3/21/03 11:41 AM Page 6 REPLACING THE DUST BAG 1) To open the dust cover of the 2) Remove the carrying bag from dust bagcompartment, press the cleaner. the clamper upward. (The clamper is located at the front of the dust cover) 3) After removing the used dust 4) Press the dust cover down bag, insert the cardboard bag... - Page 7 DJ68-00186G (0.0) 3/21/03 11:41 AM Page 7 MAINTENANCE OR REPLACEMENT OF THE FILTERS 1) INLET-FILTER. • Open the dust cover. • After detaching the filter, wash it lightly withwater, dry it in the shade, and then insert it in its original position. •...
-
Page 8: Troubleshooting
DJ68-00186G (0.0) 3/21/03 11:41 AM Page 8 USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. Select the carpet indicator when cleaning carpets..