Presetting Stations - Samsung MX-F630DB User Manual

Basic Functions
Listening to Radio
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM
band.
2. Tune in to the desired station.
• Preset Tuning : Press the 5 button to select
PRESET and then press TUNING (
buttons to select the preset station.
• Automatic Tuning : Press the 5 button to
select MANUAL and then press and hold the
TUNING ( ) button to automatically search
for active broadcasting stations.
• Manual Tuning : Press the 5 button to
select MANUAL and then briefly press the
TUNING ( ) button to increase or decrease
the frequency.
Using buttons on the product
1. Press the TUNER/AUX button to select FM
band.
2. Select a broadcast station.
• Preset Tuning : Press the 5 button to select
PRESET and then press the
[ ] buttons to select the preset station.
• Automatic Tuning : Press the 5 button to
select MANUAL and then press and hold the
[ ] buttons to automatically search the
band.
• Manual Tuning : Press the 5 button to select
MANUAL and then press the [ ] buttons
to tune in to a lower or higher frequency.
Setting Mono/Stereo
Press the MO/ST button.
•
Each time the button is pressed, the sound
switches between STEREO and MONO.
•
In a poor reception area, select MONO for a
clear, interference-free broadcast.
| NOTE |
This applies only when listening to an FM station.
\
This product does not receive AM broadcasts.
\
|
22
English

Presetting Stations

Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM
band.
2. Press the 5 button to select <MANUAL> mode.
)
3. Press the TUNING (
<89.10>.
4. Press the v button.
• Number flashes on the display.
5. Press the TUNING (
preset number.
• You can select between 1 and 15 presets.
6. Press the v button again.
• Press the v button before number
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune to a preset station, press the
TUNING (
| NOTE |
You can also use the
\
panel instead of the TUNING (
3,5,7.
) buttons to select
) buttons to select
) to select a channel.
] [
buttons on the front
) buttons in step