Listening To Radio; Presetting Stations - Samsung MAX-DS990 Instruction Manual

29P~60P(DS990)- NO GB 12/2/04 10:20

Listening to Radio

You can listen to the chosen band (FM, MW(SW1,2) broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
1 2
Press TUNER/
BAND button.
Automatic Tuning 1
•
The selection toggles back
and forth between "FM MW
(SW1,2)" each time the
Automatic Tuning 2
TUNER(BAND) button is
pressed.
Manual Tuning
increase or decrease the frequency incrementally.
Main Unit
Press the
TUNER/BAND
1 2
button to select the
desired band (FM,
MW(SW1,2)).
Automatic Tuning 1
press
Knob to select the preset station.
Automatic Tuning 2
automatically search the band.
Manual Tuning
press
to tune in to a lower or higher frequency.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
55
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Page 50
Tune in to the
SLEEP
desired station.
DISC SKIP ZOOM
Press button to select REPEAT REMAIN
the preset station.
TUNER TAPE
BAND
Press and hold button
to automatically search the band.
VOLUME TUNING
PL II
MODE
Briefly press button to
Select a broadcast
station.
Press the STOP ( ) button
to select PRESET and then
TIMER/CLOCK CANCEL
button or turn Multi Jog
TIMER ON/OFF LOGO SLIDE MODE
AH59-01379B AH59-01379B NTSC/PAL
Press the STOP ( ) button to
select "AUTO" and then press
button or turn Multi-Jog Knob to
Press STOP ( ) to select
MANUAL and then briefly
or turn Multi Jog Knob

Presetting Stations

You can store up to:
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
Example: Presetting FM 89.1 in the memory
Press the
1
DIMMER TUNER(BAND)
button and select
SLOW
MONO/ST
the FM band.
SUB TITLE
AUX
•
Each time the button is pressed,
the band switches between
"FM MW (SW1,2)".
PL II
kHz
EFFECT
MHz
4 Press to
select preset
TEST TONE
number.
SOUND EDIT
•
You can select between 1 and
P.SCAN
DIGEST
15.
PROGRAM
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
or 15 FM stations 15AM stations
2 3
Press the TUNER
Press to
MEMORY button.
select "89.10".
• •
Refer to Step 2 on page 41 "PROGRAM" flashes in the
to automatically or manually display.
tune in to a station.
PROGRAM
kHz
MHz
To preset another
5 6
Press the TUNER
station, repeat
MEMORY button.
steps 2 to 5.
•
Press the TUNER MEMORY button before
'PROGRAM' disappears from the display.
•
'PROGRAM' disappears from the display
and the station is stored in memory.
Note
kHz
MHz
•
When listening AM/SW ,
button does not work.
on the
kHz
MHz
(Dolby Pro Logic II)
56