Listening to Radio
You can listen to the chosen band (FM, MW, (SW1,2) broadcast stations) by
using either the automatic or manual tuning operation.
Remote Control Unit
2
1
Press TUNER/
BAND button.
Automatic Tuning 1
•
The selection toggles back
and forth between "FM
MW
(SW1,2)" each time the
Automatic Tuning 2
TUNER(BAND) button is
pressed.
Manual Tuning
increase or decrease the frequency incrementally.
Main Unit
Press the Function
1
2
button to select the
desired band (FM,
MW,(SW1,2)).
Automatic Tuning 1
press
Knob to select the preset station.
Automatic Tuning 2
and hold
Knob to automatically search the band.
Manual Tuning
press
to tune in to a lower or higher frequency.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
45
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Downloaded From Disc-Player.com Samsung Manuals
Tune in to the
desired station.
Press
button to select
the preset station.
Press and hold
button to
automatically search the band.
Briefly press
button to
Select a broadcast
station.
Press the STOP ( ) button
to select PRESET and then
button or turn Multi Jog
Press the STOP ( ) button to
select "AUTO" and then press
button or turn Multi-Jog
Press STOP ( ) to select
MANUAL and then briefly
or turn Multi Jog Knob
Presetting Stations
You can store up to:
15 FM stations
5 MW stations(or AM 15 stations
5 SW1 stations
(Option)
5 SW2 stations
Example: Presetting FM 89.1 in the memory
Press the
1
2
TUNER(BAND)
Press
button and select
select "89.10".
the FM band.
•
•
Each time the button is pressed,
Refer to Step 2 on page 41
the band switches between
to automatically or manually
"FM
MW
(SW1,2)".
tune in to a station.
MHz
kHz
Press
to
4
5
Press the TUNER
select preset
MEMORY button.
number.
•
•
You can select between 1 and
Press the TUNER MEMORY button before
'PROGRAM' disappears from the display.
15.
•
'PROGRAM' disappears from the display
and the station is stored in memory.
PROGRAM
MHz
kHz
To tune in to a preset station, press
remote control to select a channel.
3
Press the TUNER
to
MEMORY button.
•
"PROGRAM" flashes in the
display.
PROGRAM
MHz
MHz
kHz
kHz
To preset another
6
station, repeat
steps 2 to 5.
MHz
kHz
on the
46