Specifications - Makita BST220 Instruction Manual

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Trigger
2-2. Safety lever
3-1. Sub magazine
3-2. Locking lever
4-1. Staples

SPECIFICATIONS

Applicable staples length
Staple magazine capacity
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for pressing staples into
construction materials such as timbers.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN792:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration emission value determined according to
EN792 :
Work mode : stapling wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Explanation of general view
4-2. Main magazine
5-1. Sub magazine
5-2. Locking lever
6-1. Sub magazine
6-2. Locking lever
7-1. Groove
7-2. Hook
7-3. Screw
Model
Staple width
Overall length
Net weight
Rated voltage
) : 79 dB(A)
pA
2
) : 4.0 m/s
h
2
BST220
10 mm
10 mm - 22 mm
84 pcs
247 mm
2.3 kg
D.C. 14.4V
ENE054-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG104-1
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
ENG233-1
Cordless Stapler
Model No./ Type: BST220,BST221
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
ENG901-1
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
3
9-1. Nut
10-1. Front
10-2. Workpiece
10-3. Rear
12-1. Sight window
13-1. Sub magazine
13-2. Locking lever
BST221
10 mm - 22 mm
251 mm
D.C. 18V
Corporation as the
10 mm
84 pcs
2.4 kg
ENH101-12
responsible