Performance - D-Link DSM-G600 Instruction Manual

DSM-G600 User's Manual
Advanced > Performance
Transmit Power:
Beacon Interval:
RTS Threshold:
Fragmentation:
DTIM Interval:
Preamble Type:
CTS Mode:
D-Link Systems, Inc.
TX Rate:
Select the transfer rate. It is strongly recommended this be set to
Auto.
Choose the percentage of power being transmitted.
Beacons are packets sent by an access point to synchronize a network.
Specify a beacon interval value. The default (100) is recommended.
This value should remain at its default setting of 2,346. If you encounter
inconsistent data flow, only minor modifications to the value range
between 256 and 2,346 are recommended.
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346 is the default
setting.
Delivery Traffic Indication Message - 3 is the default setting. DTIM
is a countdown informing clients of the next window for listening to
broadcast and multicast messages.
Select Long for normal use, Short for large data transfers, or Auto.
Select None, Always, or Auto (recommended). CTS (Clear To Send)
is a function used to minimize collisions among wireless devices on
a wireless local area network (LAN). CTS will make sure the wireless
network is clear before a wireless client attempts to send wireless data.
Enabling CTS will add overhead and may lower wireless throughput.
Using the Configuration Utility
46