D-Link DSM-G600 Instruction Manual page 24

DSM-G600 User's Manual
Using the Setup Wizard (continued)
Select either Static or Dynamic IP address. When Static is selected, you will fill in these
fields:
Static IP Address
Subnet Mask
Gateway Address - Usually the LAN address
of your router.
DNS Address - A Domain Name Server
translates Domain names into IP addresses.
Select DHCP Client when you have a DHCP
server in your network. No other configuration
is required on this screen when Dynamic IP
address is selected.
Click Next.
Enter the Workgroup name, a Name
for the DSM-G600 (useful if you have
multiple storage enclosures on your
network), and a Description.
Click Next.
In Wireless Mode, select Client or
Access Point mode. Select Enable to
use the wireless function or Disable
to turn wireless off.
Select Client if you will be connecting to an
existing wireless router or access point. Select
Access Point if wireless clients will be connecting
directly to the DSM-G600.
D-Link Systems, Inc.
Using the Configuration Utility
24