Steam Ironing - Philips GC4444 Instruction Manual

 Put the mains plug in an earthed wall socket.
The amber temperature light goes on. (Fig. )
,
 When the amber temperature light has gone out, wait a while
before you start ironing.
The temperature light will go on from time to time during ironing.
using the appliance

steam ironing

1 Make sure that there is enough water in the water tank.
 Select the recommended ironing temperature (see chapter
'Preparing for use').
 Select the appropriate steam setting. Make sure that the steam
setting you select is suitable for the ironing temperature selected:
(Fig. 8)
- 1 - 3 for moderate steam (temperature settings 2 to 3)
- 4 - 6 for strong steam (temperature settings 3 to MAX)
Note:The iron will start steaming as soon as the set temperature has been
reached.
Note:If the selected ironing temperature is too low (MIN to 2) water may
drip from the soleplate (see section 'Drip stop').
ironing with ionic Deepsteam
(GC4444/GC4440/GC4430 only)
When you use the Ionic DeepSteam function during steam ironing, the
steam produced is finer than during regular steam ironing. Fine steam
reaches deeper into the fabric. This helps you to easily remove stubborn
creases.
1 Follow steps 1 to 3 in section 'Steam ironing'.
 Press and hold the Ionic DeepSteam button. (Fig. 9)
The Ionic DeepSteam light goes on and you hear a humming sound.
,
(Fig. 10)
EnGlish
9