Philips GC4444 Instruction Manual page 11

Steam boost function
A shot of steam from the special Steam Tip soleplate helps remove
stubborn creases. The steam boost enhances the distribution of steam
into every part of your garment.
The steam boost function can only be used at temperature settings
between 2 and MAX.
1 Press and release the steam boost button. (Fig. 1)
Vertical steam boost
1 The steam boost function can also be used when you hold the iron
in vertical position. (Fig. 1)
This is useful for removing creases from hanging clothes, curtains etc.
Never direct the steam at people.
Drip stop
This iron is equipped with a drip-stop function: the iron automatically
stops producing steam when the temperature is too low, to prevent
water from dripping out of the soleplate. When this happens you may
hear a sound.
Electronic safety shut-off function
(GC4444/GC4440/GC4430/GC4420 only)
The electronic safety shut-off function automatically switches off
,
the iron if it has not been moved for a while.
The red AUTO/OFF light starts blinking to indicate that the iron
,
has been switched off by the electronic safety shut-off function. (Fig.
1)
To let the iron heat up again:
- Pick up the iron or move it slightly.
- The red AUTO/OFF light goes out. If the temperature of the
soleplate has dropped below the set ironing temperature, the amber
temperature light goes on.
- If the amber temperature light goes on after you have moved the
iron, wait for it to go out before you start ironing.
EnGlish
11