Topcom OUTDOOR SPORTSWATCH 2000 User Manual page 13

12.4.2 ABSOLUTE ALTITUDE CALIBRATION.
Instead of starting from zero altitude, you can set the absolute altitude
whenever you have reliable reference, such as a peak or a topographic
map, available.
• In current time mode, press [SR] until the
altitude is displayed.
• Hold the [M] button for 2 seconds. The
flashing "SET" icon and 'ZERO' will be
displayed.
• Press the [M] button until 'ALTI' is
displayed
• Press the [S/S] button. The absolute
altitude is flashing on the display.
• Press the [S/S] or [L/R] button to increase /
decrease the number (Hold down the
button to change the number at a higher
speed).
• Hold the [M] button to confirm the setting.
• To exit Adjustment Display, hold the [M]
button for 2 seconds. "DONE" will be displayed and the watch will be
back in Altitude Mode.
12.4.3 SEA LEVEL PRESSURE CALIBRATION
The altitude can be calculated by the difference
between current and sea level air pressure.
• In current time mode, press [SR] until the
altitude is displayed.
• Hold the [M] button for 2 seconds. The
flashing "SET" icon and 'ZERO' will be
displayed.
• Press the [M] button until 'SEAP' is
displayed.
• Press the [S/S] button. The actual Sea
Level Pressure is flashing on the display.
• Press the [S/S] or [L/R] button to increase /
decrease the number (Hold down the
button change the number at a higher
speed).
• Hold the [M] button to confirm the setting.
TOPCOM Outdoor Sportswatch 2000
A LT I
A LT I
A LT I
A LT I
A LT I
A
A LT I
A L
A LTI
A LT I
13