Rear Tail, Stop, And Turn Signal Lamps - Jeep grand cherokee 2015 Owner's Manual

6. Firmly and evenly push the bulb straight into the lamp
housing until both tabs snap firmly into place and are
fully engaged.
7. Connect the wiring harness to the front fog lamp
connector.

Rear Tail, Stop, and Turn Signal Lamps

1. Raise the liftgate.
2. Remove the two push-pins from the tail lamp housing.
3. Grasp the tail lamp and pull firmly rearward to
disengage the lamp from the aperture panel.
MAINTAINING YOUR VEHICLE 665
Tail Lamp Push Pins
7