Selec Speed Control (Ssc) - If Equipped; Two-Speed Transfer Case Only) - Jeep grand cherokee 2015 Owner's Manual

488 STARTING AND OPERATING
Selec Speed Control (SSC) — If Equipped
(Four-Wheel Drive Models With MP3023

Two-Speed Transfer Case Only)

Selec Speed Control Switch
SSC is intended for off road driving in 4WD Low Range
only. SSC maintains vehicle speed by actively controlling
engine torque and brakes.
SSC has three states:
1. Off (feature is not enabled and will not activate)
2. Enabled (feature is enabled and ready but activation
conditions are not met, or driver is actively overriding
with brake or throttle application)
3. Active (feature is enabled and actively controlling
vehicle speed)
Enabling SSC
SSC is enabled by pressing the SSC switch, but the
following conditions must also be met to enable SSC:
• Driveline is in 4WD Low Range
• Vehicle speed is below 5mph (8 km/h)
• Parking brake is released
• Driver door is closed
• Driver is not applying throttle