Connecting To An Stereo System - NAD T531 Owner's Manual

Connections
CONNECTING TO A STEREO SYSTEM
PAL AUTO
NTSC
GB
NOTES
• Refer to the owner's manual of your audio system as well.
• Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the
tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
• Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the speakers may be
damaged.
WARNING
Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this DVD player to an AV
decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital
Audio Output on page 20).
12
DIGITAL AUDIO
OUT OUT
L
COAXIAL
DIGITAL
OUT
S-VIDEO
R
TO TV
COMPONENT
OPTICAL VIDEO VIDEO
S-VIDEO
OUTPUT OUT
OUT
To AUDIO OUT (L/R)
To VIDEO OUT
Audio cable (supplied)
TO S-VIDEO OUT
Video cable (supplied)
S-video cable
If the TV has an S-video input,
connect the DVD player with the
S-video cable.
To S-video input
To video input
To audio inputs of
the amplifier
Audio system
TV or monitor with
audio/visual inputs