SoftBank 912T User Manual page 50

1
Inserting & Removing the Battery Pack
②
①
1
Press down the raised dots and slide the battery
cover ( ① )
2
Lift up the battery cover ( ② )
3
Align battery pack terminal with handset terminal
and insert battery pack ( ③ )
Make sure the PULL tab is facing up.
●
When removing the battery pack, lift the PULL tab.
●
4
Slide battery cover until it clicks shut ( ④ )
Note
Do not remove the battery pack while handset power is on.
7
7 Always remove battery pack by the PULL tab. Terminals may be
damaged.
1-16
④
③
Charging with the AC Charger
Charging Time Approx. 120 min.
1
Connect the AC Charger connector to Handset
Inscription on the AC Charger connector should face down.
●
2
Insert the plug into an AC outlet
Charging Indicator lights red and charging begins.
3
After Charging Indicator goes out, remove the
plug from the AC outlet
4
Remove the connector from Handset
Press and hold Release Buttons to remove the AC Charger connector
●
from Handset.