Panasonic KX-HCM230 Getting Started page 6

PSQX2811XB.book 6 ページ ２００３年５月３０日 金曜日 午後４時３８分
3.
Attach the Sunshade by fastening the two screws.
4.
Roll up three putties around the cables. Stuff putties little into the hole to prevent the water from getting
inside. Use last putty to fix the spot.
5.
Roll up the Self Bonding tape over the puttied cables.
5–10 mm
6.
Connect the Ethernet cable to the Ethernet port of hub, the broadband router or the PC.
6
Three putties
Roll up by extending
the Self Bonding tape.
Notes
Last putty
Note
Network Camera needs Self Bonding tape to
mount on the wall or the ceiling. Please leave
half of Self Bonding tape.
Do not cover
the ventilation hole.
Please confirm Network
Camera operation before
puttying the cables. Putties
and Self Bonding tape
cannot be used twice.
Please check the length
and the type of the
Ethernet cable before
fixing with putty.