Advertisement
4. Wireless setup
This section is only relevant if wireless functionality
is available on your DRG700.
(The following instructions are only for Windows 7 /
Windows 8. For wireless setup instructions on other
operating systems, please consult the user manual.)
Wireless setup using WPA encryption key
Step 1:
Click the network icon in the notification area of the
taskbar. For example:
Step 2:
Select your network SSID and click Connect. The SSID
is the name of the wireless network.
Step 3:
Enter your WPA key and click OK. The WPA key is
the password needed for your secured wireless
network.
Note: You can find the default SSID and the WPA
key on a label shipped with the unit. They are also
printed on the label on the back of the DRG700.
You can change the SSID and the WPA key when you
configure the DRG700.
Wireless setup using WPS
Step 1:
Click the network icon in the notification area of the
taskbar.
Step 2:
Select your network SSID and click Connect.
Step 3:
Press the WPS button on the DRG.
The DRG700 automatically connects to the
computer. The connection is established and is
displayed as "Connected" in the network list.
Toggling WLAN status
Press the WPS button for >5 seconds and release it.
All user-defined WLAN interfaces are toggled on/
off. Status is indicated by WLAN LED.
8
Hide quick links:
Advertisement
