Advertisement
4. Wireless setup
This section is only relevant if wireless functionality is
available on your Hybrid Live!. The
wireless functionality is enabled.
Step 1:
To set up the wireless connection between your computer and
the Hybrid Live! you may need the SSID and WPA key of the
Hybrid Live!. The SSID is the name of the wireless network.
The WPA key is the password needed for your secured wire-
less network. The default SSID and the WPA key are printed on
the label on the rear of your Hybrid Live!.
You may write down these values here:
SSID: _____________________________________________________
WPA key: _________________________________________________
8
Step 2:
LED indicates if
(Instructions for Windows Vista / Windows 7; for other
operating systems please contact your service provider)
•
•
•
•
•
•
•
Go to "Start" at the bottom left corner and click on
"Control Panel".
The Control Panel window will appear. Click on "View
Network Status and Tasks" at the "Network and
Internet" category.
The Network Connections window will appear. Click
on the "Connect to a network".
Show "Wireless" and select the network (SSID) that is
printed on the label.
If requested press the WPS
Live!. Alternatively you can connect using the WPA key
that is printed on the label.
Your connection is now operational. Open your web
browser and verify that your connection is working.
If your connection is not working, please refer to the
troubleshooting section.
After installation you can manually change the SSID
and WPA key, by using the web-interface of the Hybrid
Live!.
button on your Hybrid
Hide quick links:
Advertisement
