Osd (On Screen Display) - NAD L75 Owner's Manual

OSD (ON SCREEN DISPLAY)

GB
22
When you have selected DOLBY DIGITAL as your SURROUND MODE, the menu will include options for
adjusting the DELAY TIME (see page 13) for each speaker channel. Using the right/left buttons, the
delay for the CENTER speaker can be set from 0 to 5ms and the REAR speakers can be set from 0 to
15 ms.
In the DOLBY PRO LOGIC mode, the REAR speakers can be set for 15 to 30 ms of delay. NIGHT MODE,
which is only available in Dolby Digital surround mode. Because of the possible wide dynamic range of
Dolby Digital material it may sometimes be desirable to reduce the extreme between soft and loud
passages when playing at low volume setting to retain intelligibility.
To get back to the MAIN MENU move the arrow to GO TO MAIN MENU and press ENTER.
6 Entering SPEAKER CONFIGURATION (see page 13) from the MAIN MENU brings up a menu that allows
you to select the speaker configuration in use.
Your choices will vary according to the SURROUND MODE (see page 12) you are using. Use the
up/down buttons to move the arrow and the right/left buttons to make your selections.
NOTE
Regardless of the available front speakers, select large for front when there is no subwoofer connected
to redirect bass frequencies to the front speakers.
• In the case of DTS or DOLBY DIGITAL, your choices are:
FRONT: SMALL or LARGE
CENTER: NONE or SMALL or LARGE
REAR: NONE or SMALL or LARGE
SUB: ON or OFF
• In the case of DOLBY PRO LOGIC, your choices are:
FRONT: SMALL or LARGE
CENTER: NONE or SMALL or LARGE
REAR: NONE or SMALL or LARGE
SUB: ON or OFF
• In the case of 3 STEREO, your choices are:
FRONT: SMALL or LARGE
CENTER: NONE or SMALL or LARGE
REAR: NONE or SMALL or LARGE
SUB: ON or OFF
7 Entering LANGUAGE from the MAIN MENU brings up a menu that allows you to change the language
of the on screen menus.
An asterisk (*) appears opposite the language currently selected. To change this selection, move the
arrow with the up/down keys to the language you want and press ENTER. The asterisk (*) will now
appear opposite the language you have selected.