Remote Control Unit; Using The Remote Control Unit; Battery Installation - NAD L75 Owner's Manual

USING THE REMOTE CONTROL UNIT

NOTES
• Ensure the slide switch near the bottom of the remote's fascia is in the "RCVR" position, otherwise most
buttons on the remote will not operate the receiver.
• Even if the remote control unit is operated within the effective range, remote control operation may
be impossible if there are any obstacles between the unit and the remote control.
• If the remote control unit is operated near other appliances which generate infrared rays, or if other
remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely,
the other appliances may also operate incorrectly.

BATTERY INSTALLATION

1 Remove the battery compartment cover.
2 Insert two "AAA" (R03, UM-4) dry batteries. Make sure that the batteries are inserted with their
positive and negative poles positioned correctly.
3 Close the cover until it clicks.
BATTERY REPLACEMENT
If the distance required between the remote control unit and main unit decreases, the batteries are
exhausted. In this case replace the batteries with new ones.
PRECAUTIONS CONCERNING BATTERIES
• Be sure to insert the batteries with correct positive "+" and negative "-" polarities.
• Use batteries of the same type. Never use different types of batteries together.
• Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.
• When the remote control unit is not to be used for a long time (more than a month), remove the
batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid
inside the battery compartment and replace the batteries with new ones.
• Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

REMOTE CONTROL UNIT

GB
23