NAD C720BEE Owner's Manual page 12

SPECIFICATIONS
12
PRE-AMP SECTION
LINE LEVEL INPUTS(DISC, CD, VIDEO, AUX, TUNER, TAPE)
Input impedance (R and C)
Input sensitivity (1V out)
Maximum input signal
Signal / noise ratio pre-amp out, A-weighted
Frequency response 20Hz - 20kHz
THD + Noise, SMPTE IM
LINE LEVEL OUTPUTS
Output impedance Pre-out
Maximum output level Pre-out
TONE CONTROLS
IR / TRIGGER OUT
Input resistance
Input voltage Minimum
Output resistance
Output voltage
POWER AMP SECTION
Continuous output power into 8Ω 2
Rated distortion (THD 20Hz - 20kHz)
Clipping power
(maximum continuous power per channel 4Ωand 8Ω)
IHF Dynamic headroom 8Ω
IHF dynamic power
(maximum short term power per channel) 8Ω
Damping factor (ref. 8Ω, 1kHz)
Input impedance (R & C)
Input sensitivity (rated output into 8Ω)
Frequency response 20Hz - 20kHz
Signal/noise ratio, A-weighted ref. 1W
Signal / Noise ratio A-weighted 1
Headphone output impedance
22kΩ+ 100pF
330mV
6V
106dB ref. 500mV
<±0.1dB (Tone defeat on)
<±0.5dB (Tone defeat off)
< 0.01% at 5V out
80Ω
Tape Source Z + 200Ω
>11V
Tape >11.5V
Treble ±5dB at 10kHz
Bass ±8dB at 100Hz
>100Ω
5V
<10Ω
Output current 50mA
12V
2x50W (17dBW)
0.03%
65W
+3.4dB
4Ω +5.0dB
110W (20.4dBW)
4Ω 160W (22.0dBW)
2Ω 2
220W (23.2dBW)
>110
20kΩ + 470pF
630mV
Voltage gain 29dB
+/- 0.2 dB
100dB
ref. 50W 117dB
95.0dB ref. 1W
THD + Noise 3
<0.03%
SMPTE IM 4
<0.02%
IHF IM 5
<0.01%
100Ω