8
Fitting the synchronizer
.01.06
1
1
Fig. 8 - 06
8
Fitting the reel stand
.01.07
Fig. 8 - 07
Installation and commissioning
3
2
Push synchronizer 1 onto the shaft so
that stop 2 is standing in the slot on the
synchronizer (see arrow)
Tighten screws 3 a little.
Connect the synchronizer plug to the
socket on the control box.
Adjust the synchronizer (see Chapter
11.04.01 Adjusting the synchronizer)
Fit the reel stand as shown in Fig. 8 - 07.
Afterwards insert the stand in the hole in
the table top and secure it with nuts pro-
vided.
8 - 4