Installation and commissioning
8
Fitting the synchronizer
.01.06
Push synchronizer 1 onto the shaft so
that stop 2 is standing in the slot on the
synchronizer (see arrow)
Tighten screws 3.
Connect the synchronizer plug to the
3
socket on the control box.
Adjust the synchronizer (see Chapter
11.04.01 Adjusting the synchronizer)
2
1
Fig. 8 - 06
8
Fitting the reel stand
.01.07
Fit the reel stand as shown in Fig. 8 - 07.
Afterwards insert the stand in the hole in
the table top and secure it with nuts pro-
vided.
Fig. 8 - 07
8 - 4