Epson I455 User Manual page 97

User's Guide
Code Situation
Recovery The printer has started in recovery mode
Mode because the firmware update failed.
* In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage from the pad, the
printer is designed to stop printing when the pad has reached its limit. Whether and how often this is required will vary according to
the number of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs. The
need for replacement of the pad does not mean that your printer has ceased to operate in accordance with its specifications. The
printer will advise you when the pad requires replacing and this can only be performed by an authorised Epson Service provider.
The Epson warranty does not cover the cost of this replacement.
Error Indicators
Solutions
Follow the steps below to try to update the firmware again.
1. Connect the computer and the printer with a USB cable. (During
recovery mode, you cannot update the firmware over a network
connection.)
2. Visit your local Epson website for further instructions.
97