Table of Contents
Advertisement
Identification of Controls (Cont'd)
Rear Panel
12V TRIGGER INPUT jack
By connecting this DVD player to another
NAD audio component or system controller
equipped with a 12V trigger output, you can
remotely operate the T 571 power ON/OFF.
POWER CORD
Connect to an AC 120V, 60Hz
outlet only.
VIDEO OUT jack
COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks
12V
TRIGGER
IN
AUDIO OUT (L/R) jacks (1, 2)
OPTICAL DIGITAL AUDIO OUT jack
Remove the dust protection cap from the connector
and connect the optical digital cable (not supplied)
securely so that the configurations of both the cable
and the connector match. Keep the dust protection
cap and always reattach the cap when not using the
connector to protect against dust intrusion.
Dust protection cap
INTRODUCTION
S-VIDEO OUT jack
VIDEO OUTPUT SELECT
switch
COAXIAL DIGITAL
AUDIO OUT jack
PAGE 9
Advertisement
Table of Contents
