Table of Contents
Advertisement
Quick Links
TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
Video Entry Phones with Built-In 125KHz Proximity Card Reader
"Brushed Stainless Steel" (similar to
brushed nickel) Optional VE-5x5 surface
mount box shown (not included)
The E-75 Series Video Entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way hands-
free audio communication and color composite video of who is at your door or gate. The E-75 also includes a built-in 125KHz prox-
imity card reader. The card reader outputs industry standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door con-
troller or any controller compatible with 26-bit Wiegand format. The E-75's compact size allows it to be mounted in a standard dou-
ble gang electrical box. The E-75 is available in five different attractive finishes to match your door hardware, light fixtures, etc.
Replacement E-75 faceplates (PNL75) can be purchased separately and are available in all five standard finishes. The E-75 entry
phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250, C-500
or C-2000B Entry Phone controller. The E-75 entry phones can also be connected to an unused analog station port (programmed for
ring down) on a phone system or connected directly to a telephone line when used with a Viking K-1900-5 or K-1900-30 dialer. The
E-75 features a built-in high resolution color video camera, a built-in proximity card reader, microphone and speaker volume controls,
selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For
outdoor installations where the unit is exposed to precipitation or condensation, the E-70 Series is available with Enhanced
Weather Protection (EWP). For more information on EWP, see DOD# 859.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• Built-in 125KHz proximity card reader with LED and beep card read
confirmation and EWP board protection
• Built-in high resolution color video camera with wide viewing angle, tilt/
swivel adjustments, and wide operating temperature of -30° F to 150° F
• Audio and video transmission on one CAT5E cable (see page 5)
• Compact size: Front panel is the size of a typical double gang mid-
size wall plate
• Mounting: Flush mounts in a double gang electrical box (2.25" deep
x 3.65" wide x 2.84" tall minimum) or surface mounts in a Viking
model VE-5x5 (not included, see DOD# 424) for mounting to a wall,
post or VE-GNP Gooseneck Pedestal (EWP recommended)
• Available in 5 standard faceplate finishes: Brushed Stainless Steel,
Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
• PNL-75 faceplates: Replacement faceplates with matching screws
available in all five standard finishes
• Vandal Resistant Features: 16 gauge polished brass or 18 gauge
304 stainless steel faceplate, 316 stainless steel push button,
stainless steel speaker screen, scratch resistant powder coating,
hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket,
mic and speaker gasket, internally sealed (IP67) push button
switch, self draining mic mount and UV stable weather resistant
powder coating (excluding E-75-SS 304 Stainless Steel faceplate)
• E-75-EWP is designed to meet IP66 Ingress Protection Rating
(see DOD# 859 for more information)
• Blue LED helps locate the push button, indicate ringing and off-hook
• Programmable intelligent call progress detection for automatic
hang-up on CPC, silence, busy signal, or time out
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
E-75-SS
E-75-BN
"Oil Rubbed Bronze"
(satin dark brown powder
paint with fine copper metallic)
P
r
a
c
P
r
a
c
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
E-75-PB
"Polished Brass"
(with clear gloss powder
paint to prevent tarnishing)
A
p
p
l
i
A
p
p
l
• Door or gate communication, business delivery entrances
• Use with any of Viking's Proximity Cards: PRX-C, PRX-C-ISO and
PRX-FOB (DOD# 198)
• Use with a Viking C-200 or C-250 to control one E-75 on a single
phone line
• Use with a Viking C-500 to control 1 or 2 (expandable to 8) E-75's
and door/gate control on a single phone line
• Use with a Viking C-2000B to control 1 to 4 E-75's and door/gate
control on a single phone line
• Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when used
with a Viking SLP-1 or SLP-4 and C-2000B
• Residential, commercial and industrial door security
• Use with a Viking K-1900-5 or K-1900-30 for automatic speed
dialing on telephone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable ringdown
capability
h
t
t
p
h
t
t
S
p
e
c
S
p
e
c
Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875" x 4.938" x 0.17"), Phone:
72mm x 46mm x 42mm (2.84" x 1.8" x 1.65")
Shipping Weight: 0.55 kg (1.2 lbs)
Operating Temperature: -34° C to 65° C (-30° F to 150° F)
Connections: (2) gel-filled butt connectors (3M Scotchlok UR2)
(See page 2 for complete specifications)
E-75 Series
E-75 Series
Double Gang Video
Entry Phones with Built-In
t
i
c
e
t
i
c
e
Proximity Card Reader
E
N
T
U
R
Y
E
N
T
U
R
Y
E-75-WH
"Satin White"
(satin white powder paint)
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
P
h
o
n
e
.
.
.
P
h
o
n
e
.
.
.
:
/
/
w
w
w
.
v
i
k
i
n
g
e
l
p
:
/
/
w
w
w
.
v
i
k
i
n
g
e
l
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
July 1, 2014
E-75-BK
"Satin Black"
(fine texture satin black
powder paint)
7
1
5
.
3
8
6
.
8
8
6
1
7
1
5
.
3
8
6
.
8
8
6
1
e
c
t
r
o
n
i
c
s
.
c
o
m
e
c
t
r
o
n
i
c
s
.
c
o
m
Advertisement
Table of Contents
Related Manuals for Viking E-75-SS
Summary of Contents for Viking E-75-SS
- Page 1 The E-75 also includes a built-in 125KHz prox- imity card reader. The card reader outputs industry standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door con- troller or any controller compatible with 26-bit Wiegand format.
-
Page 2: Camera Specifications
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. - Page 3 The E-75 is designed to be flush mounted into a standard double gang rough-in box with minimum inside dimensions of 2.25” deep x 3.65” wide x 2.84” tall. The E-75 can also be surface mounted in a Viking model VE-5x5 (not included, see DOD# 424).
-
Page 4: Surface Mounting
*** Note: Talk battery must be a minimum of 28V DC when using the speaker phone with a Viking K-1900-5 Dialer (DOD# 317) or K-1900-30 Multi-Number Dialer (DOD# 300). **** Note: When installing a line powered phone on a low voltage and/or low loop current phone system extension, a Viking TBB-1B Talk Battery Booster may... -
Page 5: Adjusting The Camera
Yellow Twisted foil and braided shield encoder (Axis M7001), etc. (Video) **** For ease of installation, a Viking Female Yellow/Red "F" to Wire Converter Cable can be used (Part # 261217) or "BNC" to wire converter cable (Part # U213510) can be used. Go to... -
Page 6: Adjusting Speaker Volume
H. Wiring the Proximity Card Reader Viking Model ES-1 (not included, see DOD# 193 for more information) VIKING MODEL ES-1 © 12V DC Back View of the E-75 Circuit Adapter VIKING Board Mounting Plate Included ELECTRONICS HUDSON, WI 54016 Doorstrike... - Page 7 The E-75 proximity card reader also operates completely independently of the E-75 phone board. When connected to a Viking ES-1 (or equivalent card reader controller) the red LED will light, indicating the card reader is powered. The LED will turn off and the transducer will beep indicating a card scan.
- Page 8 Wiegand Door Controller (see page 6) Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.